Browse Resources

This resource, provided by Erie Community College, consists of three videos demonstrating the expansion of a rubber glove in a Rough Vacuum Equipment Trainer (RVET) when pressure is removed from the chamber. In the first video, the presenter guides viewers through the experiment's setup, covering...

This video from CUNY Kingsborough Community College shows the process of running an agarose gel. The video describes the process step by step and would be easy to replicate in a laboratory setting. Running time for the video is 2:52.

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Steve Brown demonstrates fitting the neck into the guitar body during electric guitar construction. The video runs 3:11...

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Steve Brown demonstrates sanding off the neck tab with a belt sander during electric guitar construction. Topics covered...

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Steve Brown demonstrates how to evenly sand the 12" radius on an electric guitar fretboard. The video runs 6:46 minutes in...

This site features science fair projects that can be done by K-12 students. The projects are divided into simple, medium and advanced knowledge levels. Projects include ultra-simple electric generator, quick and simple telescope, supermagnet bead tricks, sticky electrostatics, drawing holograms by...

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Steve Brown demonstrates how to measure and set the fretboard scale length during electric guitar construction. Topics...

This video from CUNY Kingsborough Community College shows the process of staining and imaging an agarose gel. The video describes the process step by step and would be easy to replicate in a laboratory setting. Running time for the video is 3:18.

This video, made available by the STEM Guitar Project, is the third of three videos in the STEM Guitar Fusion 360 computer-aided manufacturing (CAM) Video Series. The narrated video covers "the post processing task to get your guitar body profile into g-Code for the machine to read." The recording...

This video, made available by the STEM Guitar Project, is the first of three videos in the STEM Guitar Fusion 360 computer-aided manufacturing (CAM) Video Series. Topics covered in this narrated video include modifying the sketch in Fusion 360 and creating the tooling library setup for cutting the...