Browse Resources

This video, provided by Columbia Gorge Community College, is the first part of a two part lecture that examines motor drive V/HZ profiles on the Omron 3G3JX-AE004. The main objective of this lecture is to "learn to adjust base and maximum frequency, change V/Hz profiles, and enable the manual torque...

This video, provided by Columbia Gorge Community College, is the second part of a two part lecture that examines motor drive V/HZ profiles on the Omron 3G3JX-AE004. The main objective of this lecture is to "learn to adjust base and maximum frequency, change V/Hz profiles, and enable the manual...

This video, from Columbia Gorge Community College, is the first part of a two part lecture that provides an introduction to motor drives. Motor drives "power electronics devices that vary the speed and torque of a motor under its direction by varying the supplied voltage magnitude and frequency."...

This video, from Columbia Gorge Community College, is the second part of a two part lecture that provides an introduction to motor drives. Motor drives "power electronics devices that vary the speed and torque of a motor under its direction by varying the supplied voltage magnitude and frequency."...

This video from Columbia Gorge Community College is part one of two videos where viewers "interpret manufacturer, mechanical, and electrical data from a pair of sample motor nameplates." An overview of motor nameplates and their purpose, electrical calculations, and mechanical calculations are...

This video from Columbia Gorge Community College is part two of two videos where viewers "interpret manufacturer, mechanical, and electrical data from a pair of sample motor nameplates." In this video, a Toshiba nameplate is highlighted. The video recording runs 6:54 minutes in length.

This webinar, published by Florence-Darlington Technical College, features advice on gaining additional ATE (Advanced Technological Education) funding for institutions that have already received an ATE grant. The presenters walk through the process of creating a strong ATE proposal, highlighting the...

Course Description: In this course, developed by Utah College of Applied Technology, students learn the setup and operation of 3+2 and 5-axis milling machines. Topics covered include setup fundamentals, basic probing routines, filtering, setting tool and fixture offsets, dialing in a fixture,...

This webinar, made available by Pennsylvania State University, was presented by John R. Clegg, a postdoctoral fellow in bioengineering in the Paulson School of Engineering and Applied Sciences at Harvard University. The purpose of the webinar is to introduce "environmentally responsive hydrogels...

In this video by Bio-Link, Josephine Pino discusses her career in biotech education. Pino began her career in biotech education at Shorline Community College co-coordinating a technician training program. Next, Pino moved onto the Community College of Rhode Island to start a...