Browse Resources

This resource, published by Erie Community College, consists of three videos that demonstrate the use of a Rough Vacuum Equipment Trainer (RVET) to freeze water at room temperature. In the first part, the presenter provides instruction on the correct setup of the RVET, including valve positions and...

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Alex Moll demonstrates preparation of the fretboard for fret installation during electric guitar construction. The video...

This video, made available by the STEM Guitar Project, is a demonstration of alignment of the fretboard for proper scale length during electric guitar construction. In the video Chad McCormack describes the entire process in detail throughout the demonstration. The recording runs 5:01 minutes in...

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Steve Brown demonstrates fret installation during electric guitar construction. The video runs 8:08 minutes in length and...

This short YouTube video, created as part of a school science project, demonstrates how to make a supersaturated solution using sodium acetate. It also illustrates an exothermic reaction or the heat of crystallization shown when the solution is touched.

This video, made available by the STEM Guitar Project, is a narrated demonstration of the creation of electric guitar bodies in Fusion 360 computer-aided manufacturing software. Tom Singer goes through the process of creating a custom guitar body shape while narrating each step in detail and...

This video, made available by the STEM Guitar Project, is a demonstration of the process of creating electric guitar bodies in Fusion 360 computer-aided manufacturing software. Topics covered include: Electronics Cavity, Neck Profile Relief, Setting up CNC Processes, Creating CNC Setups, Back of the...

As genetics and genomics research advances rapidly through the knowledge gained from the completed human DNA sequence, teachers and educators require new classroom tools to present the rich history, complexity and excitement of the world of genetics and genomics. These teaching resources include...

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Alex Moll demonstrates gluing the fret dots onto a fretboard during electric guitar construction. The video runs 2:49...

This video, made available by the STEM Guitar Project, was recorded at the Guitar Build Institute held at Aptos Middle School in San Francisco, California in 2018. In the video Nancy Chang demonstrates gluing the fretboard onto the neck of the guitar during electric guitar construction. The video...