Browse Resources

This lecture, published by Columbia Gorge Community College, demonstrates the use of "the three wattmeter, the single wattmeter, and the two wattmeter method to measure power in a balanced three wire y configured motor." The recording runs 5:47 minutes in length and part two is available to view...

This lecture, published by Columbia Gorge Community College, demonstrates the use of "the three wattmeter, the single wattmeter, and the two wattmeter method to measure power in a balanced three wire y configured motor." The recording runs 5:56 minutes in length and part one is available to view...

This video, published by Columbia Gorge Community College, is the first part of a three part lecture on 3 phase transformers. In the lecture, presenter Jim Pytel covers the design, configuration, operation, and uses of 3 phase transformers. Also covered are standard 3 phase AC transformer naming...

This video, published by Columbia Gorge Community College, is the second part of a three part lecture on 3 phase transformers. In the lecture, presenter Jim Pytel covers the design, configuration, operation, and uses of 3 phase transformers along with "electrical devices used to step up, step down,...

This video, published by Columbia Gorge Community College, is the third part of a three part lecture on 3 phase transformers. In the lecture, presenter Jim Pytel covers the design, configuration, operation, and uses of 3 phase transformers along with "electrical devices used to step up, step down,...

These presentation slides are provided by Edmonds Community College and are intended to use with the 3-D Spatial Visualization Skill Building for Additive Manufacturing activity. The slides include a blank KWLD Chart; a 2-D Cartesian Coordinate System image; a 3-D X, Y, Z-Axis diagram; a...

Program Description: This 30-hour OSHA General Industry Safety Certification Program was created by Grand Rapids Community College (GRCC), through seed funding from the Center for Advanced Automotive Technology ​(CAAT), to train workers for entry level positions in the advanced energy manufacturing...

This webinar, from the National Convergence Technology Center (CTC), was presented by Gordon Snyder from Holyoke Community College and includes an overview of technical trends related to 5G networking. Topics covered during the presentation include 5G use cases, technology, slices, deployment model,...

These resources were developed by the National Convergence Technology Center (CTC) and include presentation documents and lab activities on essential 5G concepts and skills. These materials are intended to be used as a classroom module. This material was created in response to ongoing discussions...

Module Description: This module, from Support Center for Microsystems Education (SCME), introduces "various concepts associated with scale, and a comparison of the macro, micro and nano-scales." This module is divided into the following six units: Knowledge Probe (KP) or Pre-test, Comparison of...