Browse Resources

This lecture, published by Columbia Gorge Community College, provides a detailed overview of the "general properties of fluid conductors like pipes, tubes, and hoses in hydraulic systems." The recording runs 5:54 minutes in length and part one is available to view separately.

This lecture, published by Columbia Gorge Community College, provides a detailed overview of fluid velocity and fluid power. Discussed in the presentation is "how a conductor’s cross sectional area and flow rate through it influence fluid velocity, and how pressure and flow rate influence fluid...

This lecture, published by Columbia Gorge Community College, provides a detailed overview of fluid velocity and fluid power. Discussed in the presentation is "how a conductor’s cross sectional area and flow rate through it influence fluid velocity, and how pressure and flow rate influence fluid...

This resource, published by Erie Community College, consists of three videos that demonstrate the use of a Rough Vacuum Equipment Trainer (RVET) to freeze water at room temperature. In the first part, the presenter provides instruction on the correct setup of the RVET, including valve positions and...

This resource, provided by Maricopa Advanced Technology Education Center (MATEC), is an animation of a finished wafer to packaged integrated circuits. The objective of this resource is to describe the wafer to packaged device process steps. An .mp4 is also included and runs 01:23 minutes in length. 

This lecture, published by Columbia Gorge Community College, introduces the B&K Precision 4010A function generator. The instructor shows how to "use the function generator to produce sinusoidal voltage with a desired magnitude and frequency." The recording runs 4:44 minutes in length and part two is...

This lecture, published by Columbia Gorge Community College, introduces the B&K Precision 4010A function generator. The instructor shows how to "use the function generator to produce sinusoidal voltage with a desired magnitude and frequency." The recording runs 4:19 minutes in length and part one is...

This webinar is provided by the Nanotechnology Applications and Career Knowledge Support Center (NACK Center) and is presented by Dr. Carmen L. Gomes, a mechanical engineer from Iowa State University. The presentation highlights the need for convergence between several domains, to address the...

This presentation from the National Convergence Technology Center took place at the online Winter Working Connections professional development event. In the video, Taylor Slocum describes the Gameful Mentorship program at Columbus State Community College. The program emphasizes learning through...

This video, published by Columbia Gorge Community College, is the second part of a two part demonstration of an isolated electrically excited synchronous generator in the loaded condition. The demonstration will illustrate how varying the magnitude and reactive nature of an electrical load connected...