Browse Resources
Higher Education -- Technical Education (Upper Division)
Resources | |
---|---|
This video, made available by fulblast1, shows farmers in Genoa, Nebraska check planting corn. The video also shows corn plant growth some time after planting. The recording runs 4:52 minutes in length.
This video, made available by the STEM Guitar Project, is a demonstration of checking pocket depths during electric guitar construction. Checking pocket depths is described as a way to ensure that the bridge saddles will not be too high during final guitar set-up. In the video Chad McCormack...
This publication of Leopold Center for Sustainable Agriculture, Iowa State University, is of research conducted that compared weighted average source distance (WASD) of foods grown locally in Iowa to those foods obtained from traditional sources.
This 6-page checklist, provided by EvaluATE: Evaluation Resource Center for Advanced Technological Education, identifies and describes the components of an evaluation report. This checklist is focused on the content of long-form technical evaluation reports. This checklist includes the following...
This webinar, provided by EvaluATE: Evaluation Resource Center for Advanced Technological Education, discusses checklists for improving evaluation practice. The webinar provides "an overview of the form and function of checklists, highlights evaluation checklists developed by some of the field's...
Collection Description:
This collection, developed by EvaluATE: Evaluation Resource Center for Advanced Technological Education, includes checklists that cover the six types of research discussed in the Common Guidelines for Education Research and Development, created by the Institute of Education...
Module Description:
This module, from Support Center for Microsystems Education (SCME), provides information on "the general safety rules for facilities and laboratories that use chemicals, and [allows] students the opportunity to demonstrate their understanding of these rules." This module is...
Module Description:
This module, from Support Center for Microsystems Education (SCME), provides students "with the information needed to interpret chemical labels and information about specific chemicals provided on NFPA [National Fire Protection Association] diamonds and to demonstrate an...
This animation is provided by Maricopa Advanced Technology Education Center (MATEC) and shows the dual damascene process. There are many different ways in which the dual damascene process is used. The animation shows an overview of one process:
In the dual damascene process, a low-k dielectric is...
This simulation, provided by Maricopa Advanced Technology Education Center (MATEC), uses controls (drop down menus) to adjust down force and platen speed parameters to determine an optimum CMP process recipe for focal semiconductor manufacturing. Users may assume that focal is using a rotational...
| |
← Previous | Next → |